• HOME
• |
• ABOUT US
• |
• SPECIFICATIONS
• |
• LOCATIONS
• |
• BLOG
• |
• CONTACT US

YAMAGUCHI HURRICANE 150
TECHNICAL SPECIFICATIONS

• WEIGHT DATA - Yamaguchi Hurricane 150
• Dry weight kg 113
• Load weight kg 126
• Rated Max. Loading kg 150
• L x W x H 1940mm x 689mm x 1099mm

• Performance data - Yamaguchi Hurricane 150
• Exhaust pollutants Idling CO % ≤3.8
• HC ppm ≤800
• Operating mode HC g/km ≤5.5
• CO ≤1.2
• NOX ≤0.3
• Brakes Disc front-Drum rear
• Brake distance (30km/h) m ≤7
• Beam intensity of headlight cd ≥10000
• Fuel consumption (45km/h) L/100km ≤2.2
• Start performance s ≤15
• Accelerating performance Accelerate when starting ≤16
• Accelerate when speeding up ≤14
• Max. Speed km/h 95 (conservative estimate required by law – actual top speed in excess of 150kph)
• Slide distance m ≥200
• Climbing capacity ( °) ≥18
• Horn Grade dB (A) 93~112
• Reliability km 6000
• Wear km 20000

• Main structure type and technical parameter - Yamaguchi Hurricane 150
• Engine type model 162FMJ
• Engine type Single-cylinder, 4-stroke, air-cooled
• Start type By Electric/kick start
• Ignition type C.D.I. Electric Ignition
• Diameter of cylinder (mm) 62.0
• Stroke of piston (mm) 49.5
• Cylinder x Stroke: 56.5 x 49.5
• Capacity of cylinder (ml) 149.4
• Compression ratio 9.0:1
• Rated power and relative rotate speed (kw/r/min) 8.5/9000
• Max. power and relative rotate speed (kw/r/min) 10.0/9500
• Max. torque and relative rotating speed (kw/r/min) 10.0/7500
• Min. Speed when empty load (r/min) 1420
• Min. Fuel consumption rate (g/kw.h) ≤354
• Fuel No. Above RQ-90
• Carburetor type Plunger type
• Lubrication type Pressure splash
• Fuel tank capacity (L) 12
• Lubrication oil capacity 1.1
• Oil pump type Inside-outside rotator type
• Transmission Clutch type Wet, multi-pieces
• Speed transmission type 5 speeds, normal mesh
• Transmission type Chain drive
• Transmission ratio 1st shaft 2.769
• Transmission ratio 2nd shaft 1.882
• Transmission ratio 3rd shaft 1.400
• Transmission ratio 4th shaft 1.130
• Transmission ratio 5th shaft 0.960
• Initial Transmission ratio 4.055
• Final stage transmission ratio 2.235

• Wheel data - Yamaguchi Hurricane 150
• Wheel base 1318mm
• Front wheel 70/80-17
• Rear wheel 100/80-17

• Suspension data - Yamaguchi Hurricane 150
• Driving Front shock absorber type Flexible pipe
• Rear shock absorber type Single pipe
• Frame type Pipe sheet composition welding
• Direction operation type Handle bar turntable

• Electronics data - Yamaguchi Hurricane 150
• Electric Magneto type Magnetism-forever
• Ignition coil type Automatic
• Spare plug model D8TC
• Spark plug gap 0.6-0.8mm
• Battery specification 12V-7Ah
• Type and specification of headlight Halogen 12V18/18W
• Turning light specification 12V/10W
• Brake light/rear light 12V21/5W